16A single-phase H07RN-F lead
230V · 3-pin · 3G2.5mm² · IP44
Choose the length to suit your equipment and cable route.
Shop by use
Match the outlets on your generator to your equipment. Find a suitable lead, adaptor or distribution box without guessing the connection.
Shop selected products
Select a matching blue single-phase or red three-phase connection, then choose the required length.
230V · 3-pin · 3G2.5mm² · IP44
Choose the length to suit your equipment and cable route.
230V · 3-pin · 3G4mm² · IP44
Heavy-duty rubber cable for compatible blue 32A connections.
415V · 5-pin · 5G6mm² · IP44
For equipment requiring three phases, neutral and earth.
415V · 5-pin · 16mm²
For matching higher-current three-phase supplies and equipment.
Adaptors and protected boxes for specific outlet-to-equipment connections.
Changing connector size does not increase generator capacity. Check the generator instructions and the protection requirements of the complete setup.
230V · 3-pin · Arctic cable
For a 32A equipment inlet on a 16A supply. Available current remains limited to 16A.
230V · 3-pin input and output
MCB-protected 32A output from a compatible 63A supply.
415V · 5-pin input and output
Protected step-down connection for matching 16A equipment.
5-pin 415V input → 3-pin 230V output
Uses a phase and neutral from a compatible five-pin supply.
Match the distribution box input to the generator outlet and keep the combined load within the available capacity.
MCBs provide overcurrent protection. Check the required RCD protection separately; an MCB-only box does not provide that protection.
230V · Industrial and UK socket outputs
MCB distribution for a mixed equipment setup.
230V · Blue 3-pin input and outputs
Four individually protected 16A outlets from one 32A input.
415V 5-pin input → 230V 3-pin outputs
Distributes suitable phase-to-neutral supplies to three protected outlets.
415V input → 2 × 32A + 1 × 16A outputs
Individual MCB protection for the three-phase outputs.
Buying help
Start with the supply connection, the equipment plug and the cable length.
Read the full buying guideCheck the generator outlet label and socket: voltage, amperage and pin count. Then check the equipment plug and total load. A blue 230V connection and a red 415V connection are different supplies. Send us a photo of the generator socket and equipment plug if you need help.
H07RN-F is a flexible heavy-duty rubber cable with resistance to abrasion, weather and oil. It is a practical option for frequent handling and repeated outdoor use. Cable type does not increase the capacity of your supply; the conductor size and lead length must suit the load.
No. Available power remains limited by the generator, outlet and protective devices. A connector adaptor changes the connection format. Confirm the generator instructions, load, earthing and required RCD protection before use.